KWA USP Compact Airsoft Pistol Magazine, 22 Rds

recommended) into the adapter (see note below) Extremely economical..Make sure the adapter is tightly/securely installed in the gun before the tank is tightened down.

replacement parts Service seal kit for the Hill MK3 hand pump. Full service seal kit For Hill MK3 hand pumps Includes micron filter, 7 seals and other misc.

.*For the MK4 micron filter replacement, see PY-A-5558. Micron filter replacement Fits all Hill hand pumps (does not fit MK4/MK5 pump*) Easy to replace Instructions: Unscrew the hexagonal connector on top of the base housing (to remove pump) Remove the filter from its seat in the bottom of the housing Place the replacement filter into the housing Replace the o-ring, if needed Reattach the pump and tighten the hexagonal connector Maintain your Hill hand pump, and it'll always be reliable. Replacing the filter is essential for proper functioning of the pump.

This would be an especially good addition to any hard-recoiling spring-piston rifle.You may need to buy two of these adapters, depending on the length of the scope mount you're using and on the length of the scope rail to which you're attaching this adapter. 11mm (or 3/8) dovetail-to-Weaver/Picatinny adapter 3.

04 clamping & mounting length .69 high 4. The cross slots deliver extra gripping area for the rings, making it almost impossible for the scope mount to shift.